Детали проекта

Общая информация

Название проекта

Pilot lines for modular factories (IA 50%)

Страновая программа/ План действий
Call for proposals / Grant notice
6 Дек 2018

Опубликован

6 Декабрь 2018

Срок подачи

21 Февраль 2019

Бюджет

 


Тип тендера

Гранты

Номер

H2020Z220795

Донор

EC - Европейская комиссия (ЕК)


Страны

Афганистан, Алжир, Американское Самоа, Ангола, Ангилья, Аргентина, Аруба , Австрия , Азербайджан , Бангладеш , Беларусия , Бельгия , Белиз, Бенин, Бермудские острова, Бутан , Боливия, Ботсвана, Британская территория Индийского океана, Болгария , Буркина-Фасо, Бурунди, Камбоджа, Камерун , Кабо-Верде, Каймановы острова , Центрально-Африканская Республика, Чад, Чили , Колумбия, Коморские острова, Конго (Браззавиль), Демократическая Республика Конго, Коста-Рика, Хорватия , Куба , Кипр , Чешская Республика , Дания , Джибути, Доминика , Доминиканская Республика, Восточный Тимор , Экватор, Египт, Сальвадор, Эритрея, Эстония , Эфиопия, Фолклендские острова, Фиджи , Финляндия , Франция , Французская Полинезия , Габон, Гамбия, Германия , Гана, Греция , Гренландия, Гренада , Гватемала, Гвинея, Гвинея-Бисау, Гаити, Гондурас, Венгрия , Индонезия, Исламская Республика Иран , Ирландия, Италия, Ямайка, Иордания, Казахстан, Кения, Кирибати, Южная Корея, Косово, Кыргызстан, Лаос, Латвия, Ливан, Лесото, Либерия, Ливия, Литва, Люксембург, Мадагаскар, Малави, Малайзия, Мальдивы, Мали, Мальта, Маршалловы Острова, Мавритания, Маврикий, Федеративные Штаты Микронезии, Монголия, Монсеррат, Морокко, Мозамбик, Мьянмар, Намибия, Непал, Нидерланды, Нидерландские Антильские острова, Новая Каледония, Никарагуа, Нигер, Нигерия, Пакистан, Палау, Палестина / Западный берег реки Иордан и Сектор Газа, Панама, Папуа - Новая Гвинея, Парагвай, Перу, Филиппины, Остров Питкэрн, Польша, Португалия, Румыния, Руанда, , Сент-Китс и Невис, Сент-Люсия, Сен-Пьер и Микелон, Самоа, Сан-Томе и Принсипи, Сенегал, Сейшелы, Сьерра Лионе, Словакия, Словения, Соломоновы Острова, Сомали, Южная Африка, Южный Судан, Испания, Шри Ланка, Судан, Суринам, Свазиленд / Королевство Эсватини, Швеция, Сирия, Таджикистан, Танзания, Тайланд, Того, Тонга, Туркменистан, Теркс и Кайкос, Тувалу, Уганда, Великобритания, Уругувай, Узбекистан, Вануату, Венесуэла, Вьетнам, Виргинские острова (англ.), Уоллис и Футуна, Йемен, Замбия, Зимбабве

Topic identifier:
DT-FOF-08-2019

Focus area:
Digitising and transforming European industry and services (DT)
http://ec.europa.eu/research/participants/portal/desktop/en/opportunities/h2020/focus-area/digitising_transforming.html#c,topics=focusArea/s/DT/1/1&+callStatus/asc

Types of action:
IA Innovation action
DeadlineModel:

Deadline:
21 February 2019 17:00:00

Time Zone : (Brussels time)

Horizon 2020
H2020 website
http://ec.europa.eu/programmes/horizon2020/en/h2020-section/nanotechnologies-advanced-materials-advanced-manufacturing-and-processing-and

Pillar: Industrial Leadership
Work Programme Year: H2020-2018-2020
Work Programme Part: Nanotechnologies, Advanced Materials, Biotechnology and Advanced Manufacturing and Processing
http://ec.europa.eu/research/participants/data/ref/h2020/wp/2018-2020/main/h2020-wp1820-leit-nmp_en.pdf

Call : H2020-NMBP-TR-IND-2018-2020
http://ec.europa.eu/research/participants/portal/desktop/en/opportunities/h2020/calls/h2020-nmbp-tr-ind-2018-2020.html

Call budget overview
http://ec.europa.eu/research/participants/portal/desktop/en/opportunities/h2020/topics/dt-fof-08-2019.html#budgetTable

Topic Description
Specific Challenge:
Rapid changes in a production line require a significant flexibility of reconfiguration. Modular production equipment can create highly adaptable production lines to enable efficient production of small series tailored to customer demands. Previous research has shown that the modularity can be at two levels, either as complete machines with their own interface and material handling system or as interchangeable tool heads. In both cases, the advantage of modularity should be demonstrated by the ease of use and plug-and-produce features allowing for rapid modification.
The functionality of the modules should enable the production of the widest variety of complex products. The modules need to allow rapid physical rearrangements, through either automated processes or manual intervention; and have accessible, secure interfaces in order to be connected to a common data system for production control. The interfacing with the existing hardware and legacy software is another aspect that needs to be covered.
Scope:
Proposals are expected to start from existing test beds that are flexible enough to allow for the introduction of multiple modular process units. Proposals should cover all of the following areas:
The development of a range of production modules covering several different disciplines such as mechanical cutting tools, thermal processes, laser treatments and additive manufacturing technologies, taking into account safety aspects;
The integration of comprehensive production management systems, including real-time process control in a reconfigurable line, which includes considerations for data interoperability between modules and process line (including legacy hardware and software);
Pilot production of different products covering processing technologies and features such as multi-functionality (mechanical, electrical, thermal, optical, etc.), multi materials, and complex shapes.
The production modules could be considered as demonstrators on their own. However, their integration in the pilot line as well as an actual production demonstration with a variety of components or product prototypes should be achieved before the end of the project.
Proposals are expected to cover demonstration activities driven by the industrial community.
Activities should start at TRL 5 and achieve TRL 7 at the end of the project.
The Commission considers that proposals requesting a contribution from the EU between EUR 12 and 15 million would allow this specific challenge to be addressed appropriately. Nonetheless, this does not preclude submission and selection of proposals requesting other amounts.
As an exception from General Annex D, the funding rate for eligible costs in grants awarded under this topic will be differentiated: 100% of the eligible costs for beneficiaries and linked third parties that are non-profit legal entities; and 50% of the eligible costs for beneficiaries and linked third parties that are for profit legal entities.
Expected Impact:
At least 15% reduction of time to reconfigure the production line (alternatively 15% reduction in downtime);
10% higher resource efficiency due to more suitable processing equipment for customised products;
Reduction of at least 15% of the overall cost of production;
Measurable yield improvement from run-to-run for small lot sizes.
Relevant indicators and metrics, with baseline values, should be clearly stated in the proposal.
Cross-cutting Priorities:
Contractual Public-Private Partnerships (cPPPs)
http://ec.europa.eu/research/participants/portal/desktop/en/opportunities/h2020/ftags/cppps.html#c,topics=flags/s/cPPP/1/1&+callStatus/asc

FoF
http://ec.europa.eu/research/participants/portal/desktop/en/opportunities/h2020/ftags/cppps.html#c,topics=flags/s/cPPP/1/1&+callStatus/asc

http://ec.europa.eu/research/participants/portal/desktop/en/opportunities/h2020/topics/dt-fof-08-2019.html